Release Notes

19. Description
Redundant path is shown as not being present even when one of the cable is reinserted from multi-path scenario.
Resolution
Restart iDRAC to display the correct status.
Version/Systems affected: All systems supported by this release.
Dell tracking: 61154
20. Description
BGI, which is automatically started after RLM, is not logged in Lifecycle log.
Resolution
N/A
Version/Systems affected: All systems supported by this release.
Dell tracking: 61427
21. Description
Using LC GUI, importing a server profile file larger than 125 MB from a network share may fail.
Resolution
To import a server profile file larger than 125 MB, use vFlash or import using iDRAC GUI.
Version/Systems affected: All systems supported by this release.
Dell tracking: 63688
22. Description
After AC power is applied on systems with mid-backplane installed and the host boots up for the first time, erroneous drive removal
messages may be logged during subsequent power cycles of the host.
Resolution
N/A
Version/Systems affected: All systems supported by this release.
Dell tracking: 63585
23. Description
You may be unable to set the value for LC attribute on creating a job using settings URI.
Resolution
For LC attributes, use Immediate PATCH operation on /redfish/v1/Managers/LifecycleController.Embedded.1/Attributes
resource.
Version/Systems affected: All systems supported by this release.
Dell tracking: 63921
24. Description
Firmware update from LC or iDRAC for multiple external enclosures connected to a 12G SAS HBA controller may fail when connected
in a daisy-chain configuration.
Resolution
N/A
Version/Systems affected: All systems supported by this release.
Dell tracking: 63680
25. Description
In iDRAC GUI, FC OS driver version is not displayed on the Network Devices section.
Resolution
To view the FC OS driver version, use other interfaces such as RACADM or WSMan.
Version/Systems affected: All systems supported by this release.
Dell tracking: 64168
26. Description
18
Known Issues — To be fixed in future releases