Users Guide

For more information, see the iDRAC RACADM CLI Guide available at www.dell.com/idracmanuals.

Downloading custom SSL certificate signing certificate

You can download the custom signing certificate using iDRAC Web interface or RACADM.

Downloading custom signing certificate

To download the custom signing certificate using iDRAC Web interface:

1. Go to iDRAC Settings > Connectivity > SSL.

The SSL page is displayed.

2. Under Custom SSL Certificate Signing Certificate, select Download Custom SSL Certificate Signing Certificate and click

Next.

A pop-up message is displayed that allows you to save the custom signing certificate to a location of your choice.

Downloading custom SSL certificate signing certificate using

RACADM

To download the custom SSL certificate signing certificate, use the sslcertdownload subcommand. For more information, see the

iDRAC RACADM CLI Guide available at www.dell.com/idracmanuals.

Deleting custom SSL certificate signing certificate

You can also delete an existing custom signing certificate using iDRAC Web interface or RACADM.

Deleting custom signing certificate using iDRAC web interface

To delete the custom signing certificate using iDRAC web interface:

1. Go to iDRAC Settings > Connectivity > SSL.

The SSL page is displayed.

2. Under Custom SSL Certificate Signing Certificate, select Delete Custom SSL Certificate Signing Certificate and click Next.

3. A pop-up message is displayed asking you to reset iDRAC immediately or at a later time. Click Reset iDRAC or Reset iDRAC Later as

required.

After iDRAC resets, a new self-signed certificate is generated.

Deleting custom SSL certificate signing certificate using RACADM

To delete the custom SSL certificate signing certificate using RACADM, use the sslcertdelete subcommand. Then, use the

racreset command to reset iDRAC.

For more information, see the iDRAC RACADM CLI Guide available at www.dell.com/idracmanuals.

Configuring multiple iDRACs using RACADM

You can configure one or more iDRACs with identical properties using RACADM. When you query a specific iDRAC using its group ID and

object ID, RACADM creates a configuration file from the retrieved information. Import the file to other iDRACs to identically configure

them.

NOTE:

• The configuration file contains information that is applicable for the particular server. The information is organized

under various object groups.

• Some configuration files contain unique iDRAC information, such as the static IP address, that you must modify

before you import the file into other iDRACs.

You can also use the System Configuration Profile (SCP) to configure multiple iDRACs using RACADM. SCP file contains the component

configuration information. You can use this file to apply the configuration for BIOS, iDRAC, RAID, and NIC by importing the file into a

target system. For more information, see

XML Configuration Workflow white paper available at www.dell.com/manuals.

To configure multiple iDRACs using the configuration file:

Configuring iDRAC