Release Notes

• When setting the iDRAC Service Module (ISM) monitoring attributes from the GUI, if the BIOS watchdog timer is enabled, an error
may be displayed but the attributes are set. To avoid the error, disable the BIOS watchdog timer or disable the ISM Auto System
Recovery and then apply the attributes.
• Any changes to the network settings in iDRAC take effect after 30 seconds. Any automation or user verification needs to wait for 30
seconds before verifying the new settings. iDRAC returns the old active value till the new values take effect. Any DHCP settings may
take more time (>30 seconds) depending on the network environment.
• If the system ID/Health LED turns from blue to off while running host stress test, press the ID button for one second and then press it
again to turn on the LED.
14 Limitations