CLI Guide

Table 71. Details of RACADM Proxy (continued)
● The attribute racadm getconfig
-g cfgractuning -o
cfgRacTuneChassisMgmtAtServer must be set
as non-zero in CMC.
● The attribute racadm get
system.ChassisControl.ChassisManagement
Monitoring attribute must be enabled in iDRAC.
● --proxy must be entered at the end of the
command.
●
Table 72. The root privilege is the default
privilege for Local RACADM proxy.
Required CMC
Privilege for an
operation
Required iDrac
Privilege for proxy
operation
CMC Login User Login
Chassis Configuration
Administrator
Configure
User Configuration
Administrator
Configure User
Clear Logs Administrator Logs
Chassis Control
Administrator
System Control
Server Administrator System Control
Test Alert User System Operations
Debug Command
Administrator
Debug
Fabric x Administrator
(where x is A, B, or C)
System Control
The user privilege in the Remote RACADM proxy for
CMC maps to iDRAC privilege.
● When CMC is not placed on the network, the import,
export, and file operation commands to CIFS, NFS, or
FTP will fail.
● When the Remote or Local RACADM Proxy operation
is in progress, if the iDRAC is reset, then the Proxy
operation fails and the output is not displayed in
Remote or Local RACADM.
● When racadm
getsystem.ChassisControl.ChassisManagem
entMonitoring attribute is set to monitor, all the
users including root users can only view the attribute.
To configure, set the attribute to monitor and
manage in CMC.
RACADM Subcommand Details
99