CLI Guide

Table Of Contents
jobqueue
Table 63. Details of jobqueue
Description Enables you to view and delete a job or jobs in the current Job Queue.
NOTE:
To run this subcommand, you must have the Server control privilege.
If an unexpected error message is displayed for any operation, ensure you delete
some jobs in the jobqueue and retry the operation.
Use jobqueue create command after applying a pending device configuration. Else,
you may see a job creation and deletion in the lclog.
Multi-object Set commands using INI, XML, JSON files do NOT require a jobqueue
create command; jobs will be automatically created by the Set command.
Synopsis
racadm jobqueue view -i<jobid>
racadm jobqueue delete [-i<jobid>][--all]
valid options are -i and --all.
racadm jobqueue create <fqdd> [-r <reboot type> ] [-s <start
time> ] [-e <expiry time>]
racadm jobqueue create <fqdd> [-r <reboot type>] [-s <start
time>] [-e <expiration time>] [--realtime]
Input
-iSpecifies a job ID that is displayed or deleted.
NOTE: The value JID_CLEARALL forces delete all the possible jobs in the queue.
--all—The job IDs that are not applicable are deleted.
-fqdd—Specifies an FQDD for which a job should be created.
r <reboot type>Specifies a reboot type.
noneNo Reboot Job. This option is the default value.
pwrcyclePower cycle.
gracefulGraceful Reboot without forced shutdown.
forced Graceful Reboot with forced shutdown.
start timeSpecifies a start time for job scheduled in the yyyymmddhhmmss format.
TIME_NOW means immediate. Next Reboot means job is in scheduled state until the next
manual restart.
expiry timeSpecifies expiry time for the job execution in the yyyymmddhhmmss
format. The job must start by this time. TIME_NA means expiry time is not applicable.
--realtimeSpecifies the real time job.
NOTE:
--realtime is applicable for storage configuration commands run on systems
with PERC 9 cards with firmware version 9.1 and later.
-r option is not valid for real time configuration.
Example
View jobs in the current job queue.
racadm jobqueue view
View status of a specific job ID.
racadm jobqueue view -i <JobID>
RACADM Subcommand Details 89