CLI Guide

Table 51. Details of attribute (continued)
Synopsis
racadm getsvctag [-m <module>]
Input -m <module> — Must be one of the following values:
● chassis
● server-<n> — where n = 1–16
● server-<nx> — where n = 1–8; x = a, b, c, d (lower case)
● switch-<n> — where n = 1–6
Output Any system tag as applicable.
Example
● Display Service tag of Server in Slot 1
racadm getsvctag -m server-1
● Display Service tag of all the components in the chassis
racadm getsvctag
getsysinfo
Table 52. Details of attribute
Description
Displays information related to iDRAC, managed system, and watchdog configuration.
Displays information related to CMC, managed system, and watchdog configuration.
NOTE: The host name and OS Name fields in the getsysinfo output display accurate information
only if the Dell OpenManage Server Administrator is installed on the managed system. Else, these
fields may be blank or inaccurate. An exception to this are VMware operating system names, which are
displayed even if the Server Administrator is not installed on the managed system.
Synopsis
racadm getsysinfo [-d] [-A] [-c] [-4] [-6]
Input
● —4 — Displays IPv4 settings
● —6 — Displays IPv6 settings
● —c — Displays common settings
● —d — Displays iDRAC information
● —d — Displays CMC information
● —A — Eliminates the printing of headers or labels
Output
racadm getsysinfo
CMC Information:
CMC Date/Time = Wed Sep 17 2014 23:13
Primary CMC Location = CMC-1
Primary CMC Version = 5.00
Standby CMC Version = 5.00
Last Firmware Updated = Tue Sep 16 2014 22:11
Hardware Version = A09
CMC Network Information:
NIC Enabled = 1
MAC Address = 78:2B:CB:46:5C:8A
Register DNS CMC Name = 1
DNS CMC Name = cmc-effort
Current DNS Domain = cmc.com
VLAN ID = 1
78
RACADM Subcommand Details