CLI Guide

getled
Table 27. Details of getled attribute
Description Displays the LED settings on a module: blinking, not blinking, or unknown (for empty slots).
To run this subcommand, you must have the Login User privilege.
Synopsis
racadm getled
racadm getled -m <module>
Input
—m <module> can be one of the following:
● server-<n> where n=1–16
● server-<nx> where n=1–8; x=a, b, c, d (lower case)
● switch-<n> where n=1–6
● chassis
● cmc-active
Output
● LED is blinking
● LED is not-blinking
Example
● racadm getled -m server-10
<module> <LED state>
server-10 Blinking
● racadm getled -m chassis
<module> <LED state>
server-10 Not blinking
● racadm getled -m server-1
<module> <LED state>
server-1 ON
● racadm getled -m server-9
<module> <LED state>
server-9 Extension(1)
racadm getled
LED State : Blinking
racadm getled
LED State : Not-Blinking
getniccfg
Table 28. Details of getniccfg attribute
Description
Displays the current and static NIC settings for iDRAC.
Displays the current NIC settings.
Synopsis
racadm getniccfg [-m <module>]
Input
–m <module> must be one of the following values:
RACADM Subcommand Details 67