CLI Guide

Table Of Contents
Table 21. Firmware update methods on Blade, Rack and Tower servers (continued)
FW Update Method iDRAC on Blade Servers iDRAC on Rack and Tower Servers
Firmware RACADM-FTP Yes Yes
Table 22. Firmware update methods on CMC servers
FW Update Method CMC
Local RACADM No
Local RACADM-TFTP No
Local RACADM-FTP No
Remote RACADM Yes
Remote RACADM-TFTP Yes
Remote RACADM-FTP Yes
Firmware RACADM-TFTP Yes
Firmware RACADM-FTP Yes
get
Table 23. Details of get
Description
Displays the value of one or more objects. The getsub-command has two forms.
Displays the value of a single object.
Exports the value of multiple objects to a file.
It supports multiple object value export in two file formats
JSON format SCP JSON files can be exported to a network share file.
INI format The INI format files can be exported to a local file only
NOTE: INI file format is deprecated. It is recommended to use XML or JSON formats.
Server Configuration Profile XML/JSON format XML/JSON format files can be exported to a local
file, to an NFS network share or to a CIFS network share.
NOTE: To run theGet sub-command for Server Configuration Profile XML files, use the Lifecycle
Controller version 1.1 or later.
NOTE: Some objects may have a pending value if a Set operation is performed on the object through
a reboot job. To complete the pending operation, schedule the job using a jobqueue command, and then
check for completion of the job using the returned Job ID. For more information, see jobqueue
NOTE: This command supports both IPV4 and IPV6 formats. IPV6 is applicable only for CIFS, HTTP,
and HTTPS remote shares.
Synopsis
Single-object Get
racadm get <FQDD Alias>.<group>
racadm get <FQDD Alias>.<group>.<object>
racadm get <FQDD Alias>.<group>.[<index>].<object>
racadm get <FQDD Alias>.<index>.<group>.<index>.<object>
RACADM Subcommand Details 61