CLI Guide

Table Of Contents
Table 687. Details of iDRAC.Security.CsrSubjectAltName attribute (continued)
Write Privilege
Configure iDRAC
License
Required
iDRAC Express or iDRAC Enterprise
Dependency
None
iDRAC.Security.FIPSMode (Read or Write)
Table 688. Details of iDRAC.Security.FIPSMode
Description Enables or disables the FIPS mode compliance. Enabling FIPS mode resets iDRAC configuration to factory
defaults
Legal Values
1 - Enabled
0 - Disabled
Default Value 0 - Disabled
Write Privilege Configure iDRAC
License
Required
iDRAC Express or iDRAC Enterprise
Dependency None
NOTE: Setting FIPSMode to 0 - Disabled, will not have any effect.
NOTE: To disable FIPSmode, reset the iDRAC to factory default setting ( racadm racresetcfg).
NOTE: If FIPS is enabled, you cannot perform any actions associated with the vFlash SD card, such as configuring the
vFlash SD card, exporting or backing up server profile to the vFlash, or importing server profile using vFlash.
iDRAC.Serial
The objects in this group provide configuration parameters for the serial interface of iDRAC.
NOTE: This is supported only for rack and tower systems.
iDRAC.Serial.BaudRate (Read or Write)
Table 689. Details of iDRAC.Serial.BaudRate
Description
Sets the Baud rate on the iDRAC serial port.
Legal Values
9600
19200
57600
115200
Default Value
115200
Write Privilege
Configure iDRAC
License
Required
iDRAC Express or iDRAC Enterprise
340 Database Objects With Get and Set Commands