CLI Guide

cfgServerDNSIMCName (Read or Write)
Table 200. Details of cfgServerDNSIMCName attribute
Description Displays the DNS domain name for iDRAC or IMC.
Legal Values
A valid string values
Default
None
Usage You can get and set the iDRAC DNS name using the cfgServerDNSIMCName attribute.
To set the iDRAC DNS name in:
● Firmware RACADM:
racadm config -g cfgserverinfo -i <server_slot_number> -o
cfgServerDNSIMCName <Valid_iDRAC_Name>
● Remote RACADM:
racadm -r <cmc_ip> -u <cmc_username> -p <cmc_password> config
-g cfgserverinfo -i <server_slot_number> -o cfgServerDNSIMCName
<Valid_iDRAC_Name>
● Proxy:
racadm -r <iDRAC_ip> -u <iDRAC_username> -p <iDRAC_password> config
-g cfgserverinfo -i <server_slot_number> -o cfgServerDNSIMCName
<Valid_iDRAC_Name> --proxy
To get the iDRAC DNS name in:
● Firmware RACADM:
racadm getconfig -g cfgserverinfo -i <server_slot_number> -o
cfgServerDNSIMCName
● Remote RACADM:
racadm -r <cmc_ip> -u <cmc_username> -p <cmc_password> getconfig -g
cfgserverinfo -i <server_slot_number> -o cfgServerDNSIMCName
● Proxy:
racadm -r <iDRAC_ip> -u <iDRAC_username> -p <iDRAC_password> getconfig
-g cfgserverinfo -i <server_slot_number> -o cfgServerDNSIMCName --proxy
cfgServerFirstBootDevice (Read or Write)
Table 201. Details of cfgServerFirstBootDevice
Description Sets or displays the first boot device.
You can also set a vFlash partition that is attached as a bootable device. For more information, see
cfgVFlashPartitionOSVolLabel.
NOTE: If RFS is configured as the next boot device, during restart, the system starts normally and not
from RFS.
This object is Write only.
iDRAC Property Database Group and Object Descriptions 187