CLI Guide

Table 175. Details of cfgRacTuneHttpsPort attribute (continued)
NOTE: The following port numbers are reserved and cannot be used: 21, 68, 69, 111, 123, 161, 546, 801,
4096, 5988, 5989, 6900, 9000, and 60106.
Default
443
cfgRacTuneIpRangeEnable (Read or Write)
Table 176. Details of cfgRacTuneIpRangeEnable attribute
Description
Enables or disables the IPv4 Address Range validation feature.
Legal Values
● 1 (TRUE)
● 0 (FALSE)
Default
0
cfgRacTuneIpRangeAddr (Read or Write)
Table 177. Details of cfgRacTuneIpRangeAddr attribute
Description
Specifies the acceptable IPv4 address bit pattern in the positions of the "1"s in the range mask property
(cfgRacTuneIpRangeMask).
Alogin from the incoming IP address is allowed only if the following are identical:
● cfgRacTuneIpRangeMask bit-wise and with incoming IP address
● cfgRacTuneIpRanbeMask bit-wise and with cfgRacTuneIpRangeAddr
Legal Values
An IPv4 address formatted string, for example, 192.168.0.
Default
192.168.0
cfgRacTuneIpRangeMask (Read or Write)
Table 178. Details of cfgRacTuneIpRangeMask attribute
Description
Standard IP mask values with left-justified bits. For example, 255.255.255.0.
Login from the incoming IP address is allowed only if both of the following are identical:
● cfgRacTuneIpRangeMask bit-wise and with incoming IP address
● cfgRacTuneIpRanbeMask bit-wise and with cfgRacTuneIpRangeAddr
Legal Values
An IPv4 address formatted string, for example, 255.255.255.0.
Default
255.255.255.0
cfgRacTuneSshPort (Read or Write)
Table 179. Details of cfgRacTuneSshPort attribute
Description
Specifies the port number used for the SSH interface.
NOTE: The following port numbers are reserved and cannot be used: 21, 68, 69, 111, 123, 161, 546, 801,
4096, 5988, 5989, 6900, 9000, and 60106.
180 iDRAC Property Database Group and Object Descriptions