CLI Guide

cfgSerialConsoleEnable - Read or Write
Table 159. Details of cfgSerialConsoleEnable attribute
Description
Enables or disables the serial console interface.
Legal Values
● 1 (TRUE)
● 0 (FALSE)
Default
0
1
cfgSerialConsoleQuitKey (Read or Write)
Table 160. Details of cfgSerialConsoleQuitKey attribute
Description
This key or key combination terminates Virtual Console text for iDRAC when using the console com2
command.
Legal value: ^ follows any alphabet (a-z, A-Z) ^ follows the listed special characters: [ ] \ ^ _
NOTE: The CTRL key is represented by using the ^ (carat) character.
NOTE: The CTRL key does not generate a character by itself, but must be struck simultaneously with
another key to generate a character.
For example, striking both the CTRL key and the \ key simultaneously (rather than sequentially) is denoted
as ^\.
Configuration options: The value must start with the ^ character, and must follow one of the characters —
a-z, A-Z, [,], \
In the input command, use \ without the quotes. For example:
config -g cfgSerial -o cfgSerialConsoleQuitKey "SHIFT+6"\\
Default:
<Ctrl> \
cfgSerialConsoleIdleTimeout - Read or Write
Table 161. Details of cfgSerialConsoleIdleTimeout attribute
Description
The maximum number of seconds to wait before an idle serial session is disconnected.
Legal Values
● 0 = No timeout
● 60–1920
Default
300
1800
cfgSerialConsoleNoAuth - Read or Write
Table 162. Details of cfgSerialConsoleNoAuth attribute
Description
Enables or disables the serial console login authentication.
Legal Values
● 0 — (enables serial login authentication)
iDRAC Property Database Group and Object Descriptions 175