CLI Guide

Table 128. Details of cfgDNSStaticDomainNameFromDHCP (continued)
Legal Values
● 0 — Do not use DHCP to get the Domain Name
● 1 — Use DHCP to get the Domain Name
Default
0 — Disabled
cfgRemoteHosts
This group provides properties that allow configuration of the SMTP server for email alerts.
This group enables/disables and configures firmware updates, NTP, remote syslogging and SMTP email alerting.
To apply this setting to iDRAC, use the —m option.
Use this object with the config or getconfig subcommands.
To use this object property, you must have the Chassis Configuration Administrator privilege.
The following sections provide information about the objects in the cfgRemoteHosts group.
cfgRhostsFwUpdateTftpEnable (Read or Write)
Table 129. Details of attribute - cfgRhostsFwUpdateTftpEnable
Description
Enables or disables firmware update from a network TFTP server.
NOTE: This object is read-only for iDRAC Modular servers.
Legal Values
● 1 — (TRUE)
● 0 — (FALSE)
Default
1
cfgRhostsFwUpdateIpAddr (Read or Write)
Table 130. Details of attribute - cfgRhostsFwUpdateIpAddr
Description
Specifies the network TFTP server IPv4 or IPv6 address that is used for TFTP firmware update operations.
Legal Values
A string representing a valid IPv4 or IPv6 address. For example, 192.168.0.61
Default
For IPv4, it is 0.0.0.0
cfgRhostsFwUpdatePath (Read or Write)
Table 131. Details of attribute - cfgRhostsFwUpdatePath
Description
Specifies TFTP path where firmware image file exists on the TFTP server. The TFTP path is relative to the
TFTP root path on the TFTP server.
NOTE: The server may still require you to specify the drive (for example, C:).
Legal Values
A string with a maximum length of 255 ASCII characters.
Default
<blank>
iDRAC Property Database Group and Object Descriptions 165