CLI Guide

Table Of Contents
Table 117. Details of Read only attribute - iDRAC Type (continued)
For 10G iDRAC: 8
For 11G iDRAC6 on Rack and Tower Servers: 10
For 11G iDRAC6 Enterprise on Blade Servers: 11
For 12G iDRAC on Rack and Tower Servers: 16
For 12G iDRAC Enterprise on Blade Servers: 17
Example
racadm getconfig -g idRacInfo
# idRacType=8
# idRacProductInfo=Chassis Management Controller
# idRacDescriptionInfo=This system component provides a complete
set of remote management functions for blade servers
# idRacVersionInfo=P21
# idRacBuildInfo=200708301525
# idRacName=CMC-1
racadm getconfig -g idRacInfo
# idRacType=16
# idRacProductInfo=Integrated Dell Remote Access Controller
# idRacDescriptionInfo=This system component provides a complete set of remote
management functions for Dell PowerEdge Servers
# idRacVersionInfo=1.06.06
# idRacBuildInfo=15
# idRacName=idrac-GSRS3V1
cfgStaticLanNetworking
This group contains parameters to configure the device NIC for IPv4.
NOTE: A few objects in this group may require the device NIC to be reset, that may cause a brief loss in connectivity.
cfgNicStaticEnable (Read or Write)
Table 118. Details of cfgNicStaticEnable
Description
Enables or disables the NIC.
Legal Values
0 Disabled
1 Enabled
Default
1 Enabled
NOTE: If this object is modified, then the object cfgNicEnable is also modified.
cfgNicStaticIPv4Enable (Read or Write)
Table 119. Details of cfgNicStaticIPv4Enable
Description
Enables or disables the IPv4 stack.
162 iDRAC Property Database Group and Object Descriptions