CLI Guide

Table 99. Details of techsupreport (continued)
○ TTYLog — TTYLog data
NOTE:
○ For updating the operating system application data collection, enter the value OSAppNoPII or
OSAppAll to the -t option.
○ If no value is specified then system information data is collected.
○ To perform the Oslog collection, make sure that ISM is installed and running.
○ TTYLog includes PCIeSSD data.
● -l — network share location to export the report
● -u — user name for the remote share to export the report
● -p — password for the remote share to export the report
● -f— target filename for the exported log.
NOTE: The file name must have .zip as the extension.
Examples
● To collect the system information data.
racadm techsupreport collect —t <type of logs>
● To collect the system information and TTYLog data.
racadm techsupreport collect -t SysInfo,TTYLog
● To collect the operating system application data.
racadm techsupreport collect -t OSAppAll
● To export the collected Tech Support Report, to a CIFS share.
racadm techsupreport export -l //192.168.0/share -u myuser -p xxx
● To export the collected Tech Support Report, to an NFS share.
racadm techsupreport export -l 192.168.0:/share
●
To export the collected Tech Support Report to the local file system.
racadm techsupreport export -f tsr_report.zip
testemail
Table 100. Details of testemail attribute
Description
Sends a test email from iDRACCMC to a specified destination. Prior to running the test email command,
make sure that the SMTP server is configured.
The specified index in the idrac.EmailAlert group must be enabled and configured properly. For more
information, see the see the Integrated Dell Remote Access Controller (iDRAC8) and iDRAC7 RACADM
Command Line Interface Reference Guide available at www.dell.com/support/manuals.
Synopsis
racadm testemail -i <index>
Input -i <index> — Specifies the index of the email alert to test.
148 RACADM Subcommand Details