CLI Guide

Table Of Contents
Average Readings
Last Hour = 0%
Last Day = 0%
Last Week = 0%
Peak Readings
Last Week 0% [At Mon, 05 May 2014 15:58:35]
To reset the peak utilization of a specific sensor
racadm systemperfstatistics PeakReset iDRAC.Embedded.1#SystemBoardCPUUsageStat
RAC1163: The peak utilization value of Out-Of-Band performance monitoring sensor CPU
Usage is successfully reset.
techsupreport
Table 99. Details of techsupreport
Description Allows you to perform the technical support report operations. The type of operations are:
collect Collects the technical support report data to export. You can specify the various types of
logs to be included in the report.
This operation generates a Job ID. Use this Job ID to check the status of the collect operation. To run
this operation, you must have the Server Control Commands permission.
export Exports the collected Tech Support Report data. To run this subcommand, you must have
the Execute Server Control Commands permission.
getupdatetime Gets the timestamp of the last operating system application data collection.
updateosapp Updates the operating system application data collection. To run this subcommand,
you must have the Execute Server Control Commands permission.
Synopsis
To perform the technical support report operation by specifying the type of operation.
racadm techsupreport <tech support report command type>
To collect the report data.
racadm techsupreport collect [-t <type of logs>]
To export the collected report data.
racadm techsupreport export -l <CIFS or NFS share> -u <username> -p
<password>
To get the timestamp of the last operating system application data collection.
racadm techsupreport getupdatetime
To update the operating system application data collection.
racadm techsupreport updateosapp -t <type of OS App logs>
To export the collected report data to local share.
racadm techsupreport export -f <filename>
Input
-t type of logs. You can specify any of the following values separated by a , (comma)
SysInfo System Information
OSAppNoPII Filtered OS and Application data
OSAppAll OS and Application data
RACADM Subcommand Details 147