CLI Guide

Table Of Contents
Table 95. Details of swinventory (continued)
Output
racadm swinventory
------------------SOFTWARE INVENTORY-------------------
ComponentType = FIRMWARE
ElementName = Power Supply.Slot.2
FQDD = PSU.Slot.2
InstallationDate = 2013-06-11T13:02:46Z
Current Version = 07.2B.7D
---------------------------------------------------------------
ComponentType = FIRMWARE
ElementName = Integrated Remote Access Controller
FQDD = iDRAC.Embedded.1-1
InstallationDate = NA
Rollback Version = 1.50.50
----------------------------------------------------------------
ComponentType = FIRMWARE
ElementName = Integrated Remote Access Controller
FQDD = iDRAC.Embedded.1-1
InstallationDate = 2013-06-11T13:02:48Z
Current Version = 1.50.50
NOTE: Configuration changes and firmware updates that are made within the operating system may not reflect properly in
the inventory until you perform a server restart.
systemconfig
Table 96. Details of systemconfig
Description Enables you to perform the following:
Backup and restore for iDRAC and entire system configuration.
Automatic scheduling of backup operation.
View the auto backup feature settings.
Clear the auto backup feature settings.
NOTE:
To run this subcommand, you require the Server Profile Export and Import license.
Backup operation is licensed (Enterprise) but restore operation is not licensed.
If Lifecycle Controller is disabled, starting a restore operation is unsuccessful.
If CSIOR is disabled, the system inventory can have old data during the backup operation. An
appropriate warning message is displayed.
The autobackupscheduler can be enabled or disabled. For more information about enable or
disable, see LifecycleController.LCAttributes.autobackup
The minimum Lifecycle Controller version 1.3 is required.
The minimum Lifecycle Controller version 2 1.3 is required.
Synopsis
racadm systemconfig backup -f <filename> <target> [-n passphrase] [-l
<location> -u <user name> -p <password>] [--vFlash]
racadm systemconfig restore -f <filename> <target> [-n passphrase ] [--
nopreserve] [-l <location> -u <user name> -p <password>] [--vFlash]
To create an AutoBackup Schedule.
racadm systemconfig backup [-f <filename>] <target> [-n <passphrase>][-
l <location> -u <user name> -p <password>] [--vFlash] -time <time> [-
dom <DayOfMonth>] [-wom <WeekOfMonth>] [-dow <DayofWeek>] -rp <repeat>
-mb <MaxBackup>
RACADM Subcommand Details 143