CLI Guide

Table Of Contents
To prepare the specified PCIeSSD device for removal, run the following command:
racadm storage preparetoremove: Disk.Bay.8:Enclosure.Internal.0-1:PCIeExtender.Slot.3
STOR089 : Successfully accepted the storage configuration operation.
To apply the configuration operation, create a configuration job with --realtime
option.
To create the required commit jobs, run the jobqueue command.
For more information about the jobqueue command, enter the RACADM command "racadm
help jobqueue
To perform a secure erase operation on the specified PCIeSSD device, run the following command:
racadm storage secureerase: Disk.Bay.8:Enclosure.Internal.0-1:PCIeExtender.Slot.3
RAC1040 : Successfully accepted the storage configuration operation.
To apply the configuration operation, create a configuration job, and then restart
the server.
To create the required commit and reboot jobs, run the jobqueue command.
For more information about the jobqueue command, enter the RACADM command "racadm
help jobqueue
To cancel background initialization of a virtual disk
racadm raid cancelbgi:Disk.Virtual.0:RAID.Integrated.1-1
To replace physical disk in a virtual disk configuration
racadm raid
replacephysicaldisk:Disk.Bay.0:Enclosure.Internal.0-0:RAID.Integrated.1-1 -dstpd
Disk.Bay.1:Enclosure.Internal.0-0:RAID.Integrated.1-1
To set virtual disk as a boot drive
racadm raid setbootvd:RAID.Integrated.1-1 -vd Disk.Virtual.0:RAID.Integrated.1-1
To set virtual disk as a boot drive
racadm raid setbootvd:RAID.Integrated.1-1 -vd Disk.Virtual.0:RAID.Integrated.1-1
To force physical disk online or retrive data on physical/virtual disk
racadm raid forceonline:Disk.Bay.0:Enclosure.Internal.0-0:RAID.Integrated.1-1
To force physical disk offline or remove disk from virtual disk configuration
racadm raid forceoffline:Disk.Bay.0:Enclosure.Internal.0-0:RAID.Integrated.1-1
To unlock storage
racadm storage unlock:RAID.Integrated.1-1 -key 1234 -passwd Dell@333
swinventory
Table 95. Details of swinventory
Description Displays the list of software objects and associated properties installed on a server.
NOTE: Lifecycle Controller and CSIOR may not be enabled to run this subcommand.
Synopsis
racadm swinventory
Input
racadm swinventory
142 RACADM Subcommand Details