CLI Guide

Table Of Contents
Table 93. To generate and view information about the inventory of virtual disks (continued)
Secured NO
RemainingRedundancy 0
EnhancedCache Not Applicable
T10PIStatus Disabled
BlockSizeInBytes 512
Table 94. To generate and view information about the inventory of storage enclosures
Status Ok
State Ready
DeviceDescription Backplane 1 on Connector 0 of Integrated
RAID Controller 1
RollupStatus Ok
Name BP13G+EXP 0:1
BayId 1
FirmwareVersion 0.23
SasAddress 0x500056B31234ABFD
SlotCount 24
The following command displays all enclosure keys connected to the connectors:
racadm storage get enclosures --refkey RAID.Integrated.1-1
Enclosure.Internal.0-1:RAID.Integrated.1-1
The following command is an optimized and filtered version:
racadm storage get enclosures --refkey RAID.Integrated.1-1 -o -p Name
Enclosure.Internal.0-1:RAID.Integrated.1-1
Name = BP12G+EXP 0:1
To generate and view information about the inventory of physical disk drives connected to the enclosure or backplanes,
run the following command:
racadm storage get pdisks
Disk.Bay.0:Enclosure.Internal.0-1:RAID.Integrated.1-1
The following command is an optimized version and displays the full controller physical disks along with their keys:
racadm storage get pdisks -o
racadm storage get pdisks
Disk.Bay.23:Enclosure.Internal.0-1:RAID.Integrated.1-1
Status = Ok
DeviceDescription = Disk 23 in Backplane 1 of Integrated RAID
Controller 1
RollupStatus = Ok
Name = Physical Disk 0:1:23
State = Online
OperationState = Not Applicable
PowerStatus = Spun-Up
Size = 558.38 GB
FailurePredicted = NO
136
RACADM Subcommand Details