CLI Guide

Table Of Contents
Table 92. Details of storage (continued)
NOTE: To start the operation, the
Controller.PatrolReadMode must be in Manual
mode.
-dstpd-replaces a physical disk in virtual disk
configuration.
-vd-virtual disk fqdd to make it as a bootable drive.
-speedSpecifies the initialization of the Virtual disk.
fastPerforms fast initialization.
fullPerforms slow initialization.
blink: <FQDD> or unblink: <FQDD><FQDD> can
be physical disk drives, virtual disks, or PCIeSSD.
<PCIeSSD FQDD>Specifies the PCIeSSD FQDD.
<PCIeSSD controller|enclosure FQDD>
Specifies the PCIeSSD controller or enclosure FQDD.
preparetoremoveSpecifies the PCIeSSD drive to
prepare for removal.
NOTE: Ensure that ISM is installed and running to
perform the preparetoremove operation.
secureeraseSpecifies the PCIeSSD drive to perform
the secure erase operation.
Example
Inventory
To view the help details for get command, run the following command:
racadm>>storage help get
racadm storage help get
Storage monitoring and inventory of hardware RAID connected to the system.
Usage :
racadm storage get status
racadm storage help <Object type I/II>
racadm storage get <Object type I>
racadm storage get <Object type I> -current
racadm storage get <Object type I> -pending
racadm storage get <Object type I> -o
racadm storage get <Object type I> -o -p <property names separated by comma>
racadm storage get <Object type I>:<FQDD's of Object type I separated by comma> -p
<property names separated by comma>
racadm storage get <Object type I>:<FQDD's of Object type I separated by comma>
racadm storage get <Object type II> --refkey <reference keys separated by comma>
racadm storage get <Object type II> --refkey <reference keys separated by comma> -o
racadm storage get <Object type II> --refkey <reference keys separated by comma> -o
-p <property names separated by comma>
--------------------------------------------------------------------------------
Valid Options:
Object type I : controllers, batteries, vdisks, pdisks, fans, emms, tempprobes,
psus, enclosures.
Object type II : batteries, vdisks, pdisks, fans, emms, psus, tempprobes,
enclosures.
-current <optional>: Displays only the current Raid objects from storage.If -pending
not mentioned it will consider as the default option
-pending : Displays only the Pending Raid Objects from Storage.
-o : Displays all the properties of the selected Key or Object.
-p : Displays the property names with filter.
FQDD's : Displays all the properties of the FQDD's Key.
--refkey : Displays all the reference key of Object type.
help : Displays each object type help.
NOTE: Maximum Property names can be specified in -p option is = 10.
NOTE: Maximum FQDD's or refkey can be specified is = 3.
130
RACADM Subcommand Details