CLI Guide

Table Of Contents
Table 92. Details of storage (continued)
-key <Key id>-xxx <old passphrase>
-xxx <new passphrase>
racadm storage
deletesecuritykey:<Controller FQDD>
racadm storage ccheck:<vdisk fqdd>
racadm storage cancelcheck:<vdisk fqdd>
To convert the physical disk drives and assign or delete a
hotspare. To scan physical disks connected to a controller
and detect problem, run the following command:
racadm storage converttononraid:<PD
FQDD>
NOTE: Convert to RAID and non-RAID is not
supported on PERC 10 and BOSS controllers.
racadm storage converttoraid:<PD FQDD>
racadm storage hotspare:<Physical Disk
FQDD> -assign yes -type dhs -vdkey:
<FQDD of VD>
racadm storage hotspare:<Physical Disk
FQDD> -assign yes type ghs
racadm storage hotspare:<Physical Disk
FQDD> -assign no
racadm storage patrolread:<controller
FQDD> -state start|stop
racadm raid cancelbgi:<VD FQDD>
racadm raid replacephysicaldisk:<PD
FQDD> -dstpd <PD FQDD>
NOTE:
replacephysicaldisk method is not supported
on non-redundant RAID volumes.
racadm raid setbootvd:<Controller
FQDD> -vd <VD FQDD>
racadm raid forceonline:<PD FQDD>
racadm raid forceoffline:<PD FQDD>
racadm storage unlock:<Controller
FQDD> -key <Key id> -passwd
<passphrase>
NOTE:
If the assign option is no, you cannot add
other options. If the assign option is yes and if the
RACADM Subcommand Details 127