CLI Guide

Table 92. Details of storage (continued)
To run this subcommand for configuring the storage
properties, you must have the server control permission.
NOTE: You can also run the command using raid in
place of the storage command.
Synopsis
Inventory
● To view the help details for get command, run the
following command:
racadm storage help get
● To generate and view information about the inventory of
storage root node, run the following command:
racadm storage get status
● To generate and view information about the inventory of
controllers, run the following command:
racadm storage get controllers -o
racadm storage get controllers -o -p
<property names separated by comma>
● To get the list of controllers, run the following command:
racadm storage get controllers
● To get the properties of PCIeSSD controller, run the
following command:
racadm storage get
controllers:<PcieSSD controller FQDD>
● To generate and view information about the inventory of
batteries, run the following command:
racadm storage get batteries -o
racadm storage get batteries --refkey
<controller FQDD's separated by comma>
racadm storage get batteries --refkey
<controller FQDD's separated by comma>
-o
racadm storage get batteries --refkey
<controller FQDD's separated by comma>
-o -p <property names separated by
comma>
RACADM Subcommand Details
123