CLI Guide

Table 71. Details of RACADM Proxy (continued)
Input
● -u — Specifies the user name of the remote share that
stores the catalog file.
● -p — Specifies the password of the remote share that
stores the catalog file.
● -r — Specifies the iDRAC IP address connected to CMC.
Example
Local RACADM
racadm getractime --proxy
Remote RACADM
racadm getractime -u root -p xxx -r
192.168.0 getractime --proxy
racdump
Table 73. Details of racdump attribute
Description Provides a single command to get dump, status, and general iDRACCMC board information.
This subcommand displays the comprehensive chassis status, configuration state information, and historic
event logs. Used for post deployment configuration verification and during debugging sessions.
To run this subcommand, you must have the Administrator privilege.
To run this subcommand, you must have the Debug permission.
Racdump includes the following subsystems and aggregates the following RACADM commands:
● General System/RAC Information
● Coredump Information
●
Network Interface Statistics
● Session Information
● Process Information
● RAC Firmware Build Log
● General System/RAC information — getsysinfo
● Session information — getssinfo
● Sensor information — getsensorinfo
● Switches information (IO Module) — getioinfo
● Mezzanine card information (Daughter card) — getdcinfo
● All modules information — getmodinfo
● Power budget information — getpbinfo
● KVM information — getkvminfo
● NIC information (CMC module) — getniccfg
● Redundancy information — getredundancymode
● Trace log information — gettracelog
● RAC event log — getraclog
● System event log — getsel
Synopsis
racadm racdump
racadm racdump
Input N/A
100 RACADM Subcommand Details