iDRAC8 with Lifecycle Controller Version 2.80.80.80 Release Notes May 2021 Rev.
Notes, cautions, and warnings NOTE: A NOTE indicates important information that helps you make better use of your product. CAUTION: A CAUTION indicates either potential damage to hardware or loss of data and tells you how to avoid the problem. WARNING: A WARNING indicates a potential for property damage, personal injury, or death. © 2021 Dell Inc. or its subsidiaries. All rights reserved. Dell, EMC, and other trademarks are trademarks of Dell Inc. or its subsidiaries.
Contents Chapter 1: Overview...................................................................................................................... 4 Version....................................................................................................................................................................................4 Chapter 2: Platforms affected...................................................................................................... 5 Chapter 3: What is supported............
1 Overview The Integrated Dell Remote Access Controller (iDRAC) is designed to make server administrators more productive and improve the overall availability of Dell servers. iDRAC alerts administrators to server issues, helps them perform remote server management, and reduces the need for physical access to the server. Additionally, iDRAC enables administrators to deploy, monitor, manage, configure, update, and troubleshoot Dell EMC servers from any location without using any agents.
2 Platforms affected ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● PowerEdge C4130 PowerEdge C6300 PowerEdge C6400 PowerEdge C6320 PowerEdge C6320p PowerEdge FC430 PowerEdge FC630 PowerEdge FC830 PowerEdge M630 PowerEdge M830 PowerEdge R230 PowerEdge R330 PowerEdge R430 PowerEdge R530 PowerEdge R530xd PowerEdge R630 PowerEdge R730 PowerEdge R730xd PowerEdge R830 PowerEdge R930 PowerEdge T130 PowerEdge T330 PowerEdge T430 PowerEdge T630 Precision Rack 7910 Precision Rack 7910 XL DSS 15
3 What is supported License requirements ● Software licensing has replaced hardware licensing. ● Many features in Lifecycle Controller are licensed. You must install the appropriate license to use these features. For more information, see the iDRAC 2.75.75.75 User's Guide available at www.dell.com/idracmanuals.
4 New and enhanced features Topics: • iDRAC and LC firmware iDRAC and LC firmware ● ● ● ● Enhanced VNC password strength. Added RFC3414 compliant SNMPv3 traps. Added Autocomplete flag to "off" for enhanced security. Upgraded OpenSSL version to 1.0.2x.
5 Fixes Topics: • • iDRAC and LC firmware Automation — API and CLI iDRAC and LC firmware ● ● ● ● ● ● ● 177351: Fixed an issue that caused sluggish iDRAC UI performance while multiple WSMan sessions are running. 186250: Fixed an issue where UEFI10060 and PWR1006 messages are logged intermittently during host reboot. 191678: Fixed an issue that caused failure in launching iDRAC Web UI from FQDN. 182294: Fixed the issue with adding comments in Lifecycle Log.
6 Important notes 1. Running an OS DUP firmware update for a communication device may not display the rollback information correctly in iDRAC. 2. The following message is displayed when the firmware is updated using remote racadm—"Error: Session is not valid." When this message is displayed, you can use remote RACADM with CIFS/NFS share for the firmware update. 3. For Dell online catalog update, downloads.dell.com only supports https protocol. 4.
21. Fibre channel NIC cards with two or four ports are displayed as a single port card in Lifecycle Controller. However, all ports are updated when a firmware update is performed. 22. The option to enable or disable the disk cache policy for SWRAID controllers is supported only on SWRAID controller driver version 4.1.0-0025 or later. 23. ResetKeys under Action in the SecureBoot resource is available only on systems with supported BIOS. 24.
7 Limitations ● Systems with iDRAC firmware version 2.65.65.65 installed do not have any real time functionality for the slow/full initialization operation on drives. Check the System Setup/BIOS (F2) for these operations. ● If Flex Address is enabled on Chassis Management Controllers (CMC), iDRAC and LC do not display the same MAC addresses. To view the chassis-assigned MAC address, use the iDRAC web interface or the CMC web interface. Go to General > Network Settings.
● ● ● ● ● ● ● ● ● ○ Emulex OneConnect OCm14104-U1-D 4-port 10 GbE rNDC CNA ○ Emulex OneConnect OCm14102-U5-D 2-port 10 GbE Mezz CNA ○ Emulex OneConnect OCm14102-U4-D 2-port 10 GbE bNDC CNA ○ Emulex OneConnect OCe14102-N1-D 2-port PCle 10 GbE NIC ○ Emulex OneConnect OCm14104-N1-D 4-port 10 GbE rNDC CNA ○ Emulex OneConnect OCm14102-N5-D 2-port 10 GbE Mezz CNA ○ Emulex OneConnect OCm14102-N6-D 2-port 10 GbE bNDC CNA LC may display multiple drive names for some CDs or DVDs, such as the ones containing opera
8 Known issues Topics: • • • Expand operations failing iDRAC inaccessible using FQDN name after DNS configurations change Login denied in Virtual Console Expand operations failing Description Frequent requests with expand operation in Redfish generates multiple core files that may internally cause the URI to return 400 Bad Request or 500 Internal Server error response. Workaround N/A Systems affected All systems supported by this release.
9 Installation Installation instructions ● From the Windows host operating system (managed node), run the Dell Update Package for Windows and follow the instructions on the update wizard. ● From the Linux host operating system (managed node), run the Dell Update Package for Linux from the shell prompt. Follow the instructions displayed on the console. ● From the management station, remotely update the firmware using the iDRAC web interface: 1.
10 Lifecycle Controller Remote Services — client tools Use the OpenWSMAN CLI client tool to send WS-MAN commands to Lifecycle Controller. OpenWSMAN CLI OpenWSMAN CLI is an open source Linux WS-MAN client. OpenWSMAN CLI source code and installation details are available at http://sourceforge.net/projects/openwsman/files/wsmancli. Sample OpenWSMAN CLI Command (Enumeration Operation): wsman enumerate http://schemas.dmtf.
11 Resources and support For more information about the features of this release, see the documentation for iDRAC 2.70.70.70. Latest Release Notes To access the latest Release Notes for this version of iDRAC: 1. 2. 3. 4. Go to www.dell.com/idracmanuals. Click the link for the generation and then click the firmware series of iDRAC. Click DOCUMENTATION. Click MANUALS AND DOCUMENTS. Accessing documents using the product search 1. Go to https://www.dell.com/support. 2.
12 Contacting Dell EMC Dell EMC provides several online and telephone-based support and service options. Availability varies by country and product, and some services may not be available in your area. To contact Dell EMC for sales, technical support, or customer service issues, see https://www.dell.com/contactdell. If you do not have an active Internet connection, you can find contact information on your purchase invoice, packing slip, bill, or the product catalog.
