Users Guide

Restore operation sequence
The restore operation sequence is:
1. Host system shuts down.
2. Backup file information is used to restore the Lifecycle Controller.
3. Host system turns on.
4. Firmware and configuration restore process for the devices is completed.
5. Host system shuts down.
6. iDRAC firmware and configuration restore process is completed.
7. iDRAC restarts.
8. Restored host system turns on to resume normal operation.
Monitoring iDRAC using other Systems Management
tools
You can discover and monitor iDRAC using Dell Management Console or Dell OpenManage Essentials. You can also use Dell
Remote Access Configuration Tool (DRACT) to discover iDRACs, update firmware, and set up Active Directory. For more
information, see the respective user’s guides.
Setting up managed system and management station 77