Release Notes

Issue 15:
Description
In the Network Interfaces page > Host OS Network Interfaces section, the link to the Network Devices page is not
available for embedded LOM.
Resolution
In the Network Devices page, see the FQDD detail that does not have the link.
Version/Systems Affected
All Dell PowerEdge systems with iDRAC8.
Issue 16:
Description
The Print option in iDRAC web page does not work if you are using Internet Explorer for iDRAC web interface.
Resolution
Use the Print option from the browser or use other supported browsers such as Firefox, Chrome, or MAC Safari.
Version/Systems Affected
All Dell PowerEdge systems with iDRAC8.
Issue 17:
Description
Relevant status is not shown when a corrupt SD card is inserted. Currently, the status is displayed as Absent.
Resolution
Make sure a valid SD card is inserted.
Version/Systems Affected
All Dell PowerEdge systems with iDRAC8.
Issue 18:
Description
When you log in to the iDRAC web interface using Internet Explorer 8.x and prior versions, content in few pages is not
displayed properly and a few UI controls may not work.
This is a known issue with Internet Explorer.
Resolution
Internet Explorer 8.x and prior versions, are not supported browsers with iDRAC8. Ensure that you use Internet
Explorer 9 and later versions.
Version/Systems Affected
All Dell PowerEdge systems with iDRAC8.
Issue 19:
Description
The firmware images for all components are deleted from the firmware partition on Lifecycle Controller, when the
partition reaches 90% of space limit. After the firmware images are deleted, the rollback option
for all the components is listed as NULL, across all interfaces such as WS-MAN, RACADM, GUI and the following
log message is logged in the Lifecycle log:
"RED032: Reached maximum size limit allowed for storing firmware images. Deleted
all rollback firmware images."
Resolution
None