Release Notes

Issue 61:
Description
SNMP Agent Default Community Name (public). [Nessus]
Resolution
iDRAC provides limited read-only information to 3rd party tools for identification purposes only. The SNMP Agent
is enabled by default and uses the default SNMP community name. The SNMP Agent can be disabled or SNMP
community name can be changed if not using 3rd party tools.
Versions/Systems Affected
All Dell PowerEdge systems with iDRAC8.
Issue 62:
Description
SSL Certificate - Self-Signed Certificate. [Qualysguard, Nesssus, Rapid7, Retina].
Resolution
iDRAC default SSL Certificate is self-signed by iDRAC. Upload a 3rd party or in-house CA signed SSL certificate.
Versions/Systems Affected
All Dell PowerEdge systems with iDRAC8.
Issue 63:
Description
On systems running Microsoft Windows Server 2016 with Internet Explorer 11, iDRAC and CMC GUI may not
display the content. The issue is not observed in Internet Explorer 11 on systems running Windows Server 2012 R2.
Resolution
Set the IP address to local intranet and restart the browser.
Versions/Systems Affected
All Dell PowerEdge systems running Windows Server 2016 with Internet Explorer 11.
Issue 110977:
Description
When IO Identity Optimization is enabled and you configure the Virtual Addresses, Storage Initiator, and Target
settings, the job runs correctly. However, ConfigResults do not list the change set.
Resolution
Refer the Lifecycle Controller logs.
Version/Systems Affected
All Dell PowerEdge systems with iDRAC8.
Issue 236311:
Description
Persistence policy is not supported on ChassisSlot NIC devices.
Resolution
Reconfigure or clear the Virtual, Storage Initiator, or Target settings manually.
Version/Systems Affected
All PowerEdge blade servers on PowerEdge FX2 with iDRAC8.