Manualshelf

Release Notes

ManualsBrandsDell ManualsActive System ManageriDRAC8 with Lifecycle Controller Version 2.12.12.12
11121314151617181920
Resolution
Change the virtualization mode to the correct setting in a single import XML job, and then change the remaining
settings using a separate import XML job.
Versions/ Systems Affected
All Dell PowerEdge systems with iDRAC8.
Issue 42:
Description
While importing or replacing license files using Google Chrome or Microsoft Internet Explorer, the operation fails for
certain license files.
Resolution
Import or replace the license files using other supported browser(s) or using other interfaces such as RACADM,
Lifecycle Controller, and so on.
Versions/ Systems Affected
All Dell PowerEdge systems with iDRAC8.
Issue 43:
Description
When the physical drives connected to a PERC storage controller are in Non-RAID (or unitialized) state, the size
reported by the iDRAC interfaces (WS-MAN, RACADM, and iDRAC GUI) is slightly less than the actual size of the
drive.
Resolution
This is only a reporting issue. Full capacity of the drives can be used to deploy the operating systems. Other Dell
applications and utilities will continue to report the right size.
Versions/ Systems Affected
All Dell PowerEdge systems with iDRAC8.
Issue 44:
Description
On updating Dell PowerEdge FD332 PERC controllers to 25.2.2-0002, the controller is switched to HBA mode.
Resolution
Manually switch the controller to RAID mode by rebooting the host and with the Ctrl+R option using the Option ROM
interface.
Versions/Systems Affected
All Dell PowerEdge system with iDRAC8 and with PERC Controller version 25.2.2-0002.
Issue 45:
Description
Using the Server Configuration Profile Import feature with EndHostPowerState attribute set to ON may not power on
the server after the job is complete in some cases where the configuration changes does not require host server to be
powered ON to apply the settings. This impacts iDRAC Direct functionality as well as profile import using WS-MAN
and RACADM.
Resolution
In the target XML to be applied, include at least one attribute from NIC, RAID, or BIOS.
Versions/ Systems Affected
All Dell PowerEdge systems with iDRAC8.