Release Notes

Supported Web Browsers for iDRAC8
Microsoft Internet Explorer 9
Microsoft Internet Explorer 10
Microsoft Internet Explorer 11
Safari version 6.0
Safari version 7.0
Mozilla Firefox version 29
Mozilla Firefox version 30
Google Chrome version 33
Google Chrome version 34
What’s New
Support for the following PowerEdge systems:
o
PowerEdge T430
o
PowerEdge R530
o
PowerEdge R430
o
PowerEdge M630
o
PowerEdge FC630
o
PowerEdge DCSFS3510
o
PowerEdge DCS6400
Configure CMC firmware update settings to perform firmware update for CMC and its shared
components from iDRAC. This is applicable only for FX2/FX2s chassis.
Update to the list of licensable features.
Support for DNS domain name in SNMP traps.
iDRAC8 Fixes
None
iDRAC8 - Important Notes
License Requirements: Software licensing has replaced hardware licensing. For more
information, see the
Integrated Dell Remote Access Controller 8 Version 2.00.00.00 User's Guide
.
Lifecycle Controller features such as Auto Discovery and vFlash are now licensed. Install the
correct licenses for Lifecycle Controller Remote Services to work properly.
Only if there is one or more network interface cards (NDC or LOM) present on the managed
system,
Network Devices
appears under
Overview
->
Hardware
section in the iDRAC8 Web
interface.
For the Virtual Console and Virtual Media to function properly, iDRAC8 Web URL must be added
to the Local Intranet site list and the security level for the Local Intranet zone must be set to
Medium-Low. In addition, if Virtual Console and Virtual Media are configured to use Java plug-in,
disable the
Enhanced Security Mode
in Internet Explorer. If this is not possible, then in iDRAC8,
configure Virtual Console to use the ActiveX plug-in.
If the instant messenger is launched in the Virtual Console viewer with ActiveX native plug-in
and another application is started (example Notepad, WordPad, and so on) without minimizing
the Virtual Console, the instant messenger box also pops-up on other applications. This does
not happen with Java plug-in.
When a system is in POST, it is not possible to attach a vFlash partition as the first boot device.