Reference Guide

message. You can perform a force reset using this
option.
Example
• Reset the configuration on iDRAC.
racadm racresetcfg
The RAC configuration has initiated restoration to
factory defaults.
Wait up to a minute for this process to complete
before accessing the RAC again.
• Reset when vFlash Partition creation is in progress.
racadm racresetcfg
A vFlash SD card partition operation is in progress.
Resetting the iDRAC may corrupt the vFlash SD card.
To force racresetcfg, use the -f flag.
remoteimage
Descripti
on
Connects, disconnects, or deploys a media file on a remote
server.
To run this subcommand, you must have the Configure iDRAC
privilege.
Required
License
Remote File Share
Synopsis
racadm remoteimage [-m <module> | -a]
racadm remoteimage -d [-m <module> | -a]
racadm remoteimage -s [-m <module> | -a]
racadm remoteimage -c [-m <module> | -a] [-u
<username> -p <password> -1 <image_path>]
racadm remoteimage -e [-m <module> | -a] [-u
<username> -p <password> -1 <image_path>]
Input
• -c — Connect the image.
• -d — Disconnect image.
• -u — User name to access the network share.
• -p — Password to access the network share.
• -l — Image location on the network share; use double
quotation marks around the location.
94