Reference Guide

====================
PID USER VSZ STAT COMMAND
1 root 5236 S {systemd} /sbin/init
2 root 0 SW [kthreadd]
3 root 0 SW [ksoftirqd/0]
6 root 0 SW [watchdog/0]
7 root 0 SW< [khelper]
8 root 0 SW [kdevtmpfs]
9 root 0 SW< [netns]
153 root 0 SW [sync_supers]
155 root 0 SW [bdi-default]
157 root 0 SW< [kblockd]
166 root 0 SW [khubd]
16233 root 40916 S racadm racdump
16246 root 3824 S sh -c /bin/ps
16247 root 3828 R /bin/ps
26851 root 0 SW [kworker/u:3]
===========================================================
====================
RAC Firmware Build Log
===========================================================
====================
BLD_TAG=idracfw_bldtag_2.05.05.05_691231_1800_00
BLD_VERSION=2.05.05.05
BLD_NUMBER=69.12.31
BLD_DATE=2.00.00.00.733
BLD_TYPE=idrac
BLD_KERNEL=ZIMAGE
racreset
Descripti
on
Resets iDRAC. The reset event is logged in the iDRAC log.
To run this subcommand, you must have the Configure iDRAC
permission and configure user privilege.
NOTE: After you run the racreset subcommand, iDRAC may
require up to two minutes to return to a usable state.
Synopsis
racadm racreset soft
racadm racreset hard
racadm racreset soft -f
racadm recreset hard -f
92