Reference Guide

percent packet lossround-trip min/avg/max =

4.121/4.121/4.121 ms

ping6

Descriptio

Verifies if the destination IPv6 address is reachable from iDRAC

or with the current routing-table contents. A destination IPv6

address is required. Based on the current routing-table

contents, an ICMP echo packet is sent to the destination IPv6

address.

To run this subcommand, you must have Debug privilege.

Synopsis

racadm ping6 <ipv6address>

Input <ipv6address> — the IPv6 address of the remote endpoint to

ping.

Example

Pinging 2011:de11:bdc:194::31 from

2011:de11:bdc:194::101 with 32 bytes of data:

Reply from 2011:de11:bdc:194::31: time<1ms

Ping statistics for 2011:de11:bdc:194::31:

Packets: Sent = 4, Received = 4, Lost = 0

(0% loss),

Approximate round trip times in milli-seconds:

Minimum = 0ms, Maximum = 0ms, Average = 0ms

racdump

Descripti

Provides a single command to get dump, status, and general

iDRAC board information.

To run this subcommand, you must have the Debug permission.

• General System/RAC Information

• Coredump Information

• Network Interface Statistics

• Session Information

• Process Information