Reference Guide

• Displays the statistics for the integrated NIC.
$ racadm nicstatistics NIC.Integrated.1-1
Total Bytes Received:0
Total Bytes Transmitted: 0
Total Unicast Bytes Received: 0
Total Multicast Bytes Received: 0
Total Broadcast Bytes Received: 0
Total Unicast Bytes Transmitted: 0
• Get the network statistics.
$ racadm nicstatistics
NIC.Slot.5-2-1 : QLogic CNA Gigabit Ethernet-B8:AC:
6F:B3:BF:10
NIC.Slot.5-2-1 : QLogic CNA Gigabit Ethernet-B8:AC:
6F:B3:BF:11
NIC.Slot.5-2-1 : QLogic CNA Gigabit Ethernet-B8:AC:
6F:B3:BF:12
NIC.Slot.5-2-1 : QLogic CNA Gigabit Ethernet-B8:AC:
6F:B3:BF:13
NIC.Slot.5-2-1 : QLogic CNA Gigabit Ethernet-B8:AC:
6F:B3:BF:14
ping
Descripti
on
Verifies if the destination IP address is reachable from iDRAC
with the current routing-table contents. A destination IP address
is required. Based on the current routing-table contents, an
ICMP echo packet is sent to the destination IP address.
To run this subcommand, you must have the Debug privilege.
Synopsis
racadm ping <ipaddress>
Input <ipaddress> — The IP address of the remote endpoint to ping.
Output
PING 10.94.161.161 (10.94.161.161): 56 data
bytes64 bytes from 10.94.161.161: seq=0 ttl=64
time=4.121 ms
10.94.161.161 ping statistics
1 packets transmitted, 1 packets received, 0
87