Reference Guide

• -q — The sequence number from which the records must be
displayed. Records older than this sequence number is
displayed.
NOTE: This parameter input is an integer. If an
alphanumeric input is provided, then invalid
subcommand syntax error is displayed.
• -n — Specifies the n number of records that must be
displayed. On Local RACADM, if this parameter is not
specified, by default 100 logs are retrieved.
• -r — Displays events that have occurred after this time. The
time format is yyyy-mm-dd HH:MM:SS. The time stamp must
be provided within double quotation marks.
• -e — Displays events that have occurred before this time.
The time format is yyyy-mm-dd HH:MM:SS. The time stamp
must be provided within double quotation marks.
• -f <filename> — Specifies the file location and name
where lifecycle log is exported.
• -a <name> — Specifies the FTP Server IP address or FQDN,
user name, and password.
• -l <location> — Specifies the location of the network
share or area on file system where lifecycle log is exported.
Two types of network shares are supported:
– SMB-mounted path: //<ipaddress or domain
name>/<share_name>/<path to image>
– NFS-mounted path: <ipaddress>:/<path to image>.
• -u <user> — Specifies the user name for accessing the FTP
server, or Domain and user name for accessing network
share location.
• -p <password> — Specifies the password for accessing the
FTP server or share location.
• -s — The severity used to filter the records. Provide multiple
severities using a "," as the delimiter. The value is case-
insensitive. Valid Severity values:
– Warning
– Critical
– Info
• —m <Comment> — User comment string for a record that
must be inserted in the Lifecycle Controller log. This
comment string must be less than 128 characters. The text
must be specified within double quotation mark.
NOTE: HTML-specific characters may appear as
escaped text.
• -m <Worknote> — Adds a worknote (an entry) in the
Lifecycle log. This worknote must be less than 256
81