Reference Guide

OS Driver Version: 9.1.10.27
First FC Target WWPN:
00:00:00:00:00:00:00:00
First FC Target LUN: 0
Second FC Target WWPN:
00:00:00:00:00:00:00:00
Second FC Target LUN: 0
Hard Zone Address: 0
Hard Zone Enable: Disabled
FC Tape Enable: Disabled
Loop reset Delay: 5
Frame Payload Size : 2048
Fabric Login Retry Count: 0
Fabric Login Timeout: 0
Port Login Retry Count: 8
Port Login Timeout: 3000
Port Down Retry Count: 30
Port Down Timeout: 0
Link Down Timeout: 30000
Port Number: 1
Port Speed: 0
Max Number of IOs per connection supported: 9
Maximum number of Logins per port: 8
Maximum number of exchanges: 9
Maximum NPIV per port: 1
Maximum number of FC Targets supported: 8
Maximum number of outstanding commands across all
connections: 9
Flex Addressing: Capable
UEFI: Capable
FC Start: Capable
On Chip Thermal Sensor: Capable
Feature Licensing: Not Capable
ifconfig
Description Displays the contents of the network interface table.
To use this subcommand, you must have the Execute
Diagnostic Commands permission.
Synopsis
racadm ifconfig
Example
$ racadm ifconfig
74