Reference Guide

BIOS.SysSecurity.SetupPassword (Read or Write)
Descripti
on
Set up the system password. Optional parameter –o <string>
is used with this object to provide old password as an
authentication for changing the previously configured password
to the new password.
The password can include the following:
• Up to 32 characters including whitespace.
• Contain numbers 0 through 9.
• Only lower case alphabets are accepted.
• Special characters accepted are +, ",,, — , ., /, ;, [, \, ], `.
To enable password modification, J_EN_PASSWD must be
installed.
To clear the already configured password, use the option
available under F2 (system setup) during system start.
Legal
Values
String of up to 22 characters
Default
Value
Not Applicable
Write
Privilege
Server Control
License
Required
iDRAC Express or iDRAC Enterprise
Depende
ncy
None
BIOS.SysSecurity.SHA256SetupPassword (Read or Write)
Descripti
on
Indicates the SHA256 hash of the setup password.
Legal
Values
String of 64 characters
Default
Value
Not Applicable
Write
Privilege
Server Control
542