Reference Guide

• Displays the configuration properties for the user named
root.
racadm getconfig -u root
• Displays the user group instance at index 2 with verbose
information for the property values.
racadm getconfig -g cfgUserAdmin -i 2 -v
• Displays an entire group of serial configuration.
racadm getconfig -g cfgSerial
• Displays a single object from a particular group.
racadm getconfig -g cfgSerial -o
cfgSerialBaudRate
• Displays an indexed group.
racadm getconfig -g cfgUserAdmin -o
cfgUserAdminUserName -i 2
• Displays the current Enhanced Cooling Mode property
configuration.
racadm getconfig –g cfgThermal
gethostnetworkinterfaces
Descripti
on
Displays host network interface details.
NOTE: To run this subcommand, you must have iDRAC
service module installed on the server operating system.
Synopsis
racadm gethostnetworkinterfaces
racadm gethostnetworkinterfaces <NIC FQDD>
Examples
• To display the details of all the network interfaces on the
server.
racadm gethostnetworkinterfaces
Local Area Connection 12
Description : iDRAC Virtual NIC
USB Device #8
Status : Up
Interface Type : Ethernet
DHCP : Enabled
DHCPServerV4 : 169.254.0.1
MAC Address : 00-25-64-F9-7A-E7
IPv4 Address : 169.254.0.2
Subnet Mask : 255.255.255.0
50