Reference Guide

NOTE: If the vFlash card is present but is not enabled, the query for any
property under this group displays:
ERROR: vFlash is not enabled.
To view the properties of this group, enable the vFlash using the command:
racadm config -g cfgvFlashSD -o cfgvFlashSDEnable 1
The following sections provide information about the objects in the
cfgVFlashSD group.
cfgVFlashSDInitialized (Read Only)
Descripti
on
Displays whether an SD card is initialized.
Legal
Values
• 0
• 1
Default
None
cfgVFlashSDEnable (Read or Write)
Descripti
on
Enables or disables the vFlash SD card.
NOTE: Disabling vFlashPartition by setting
cfgVFlashSDEnable to 0 does not require a license.
Legal
Values
• 0 (Disable)
• 1 (Enable)
Default
1
cfgVFlashSDSize (Read Only)
Descripti
on
Displays the size of the vFlash SD card in megabytes (MB).
Legal
Values
A string of upto 64 characters.
Default
<card size>
243