Reference Guide

Default
1
Example
racadm getconfig -g cfgNetTuning
cfgNetTuningNicSpeed=100
cfgNetTuningNicFullDuplex=1
cfgNetTuningNicMtu=1500
cfgNetTuningNicAutoneg=1
cfgNetTuningNic100MB (Read or Write)
Descripti
on
Specifies the speed for iDRAC NIC.
NOTE: To set this property:
• iDRAC Nic selection must be set to Dedicated mode.
• iDRAC Nic Auto negotiation must be disabled.
• iDRAC IPv4 must be enabled.
• iDRAC IPv4 DHCP must be enabled.
• iDRAC IPv6 must be enabled.
• iDRAC IPv6 auto configuration must be enabled.
Legal
Values
• 0 (10 MBit)
• 1 (100 MBit)
• 2 (1000 MBit)
NOTE: You cannot manually set the Network Speed to 1000
MBit. This option is available only if
cfgNetTuningNicAutoNeg is set to 1 (Enabled).
Default
1
cfgNetTuningNicFullDuplex (Read or Write)
Descripti
on
Specifies the duplex setting for the NIC. This property is used
only if thecfgNetTuningNicAutoNeg is set to 0 (disabled).
Legal
Values
• 0 (Half Duplex)
• 1 (Full Duplex)
240