Reference Guide

• 2 (Enabled with Remote RACADM) — It is not applicable for
iDRAC Enterprise on Blade Servers.
Default
0
cfgSmartCardCRLEnable (Read or Write)
Descripti
on
Enables or disables the Certificate Revocation List (CRL).
This object is applicable only for iDRAC on Rack and Tower
Servers and not for iDRAC Enterprise on Blade Servers.
Legal
Values
• 1 (TRUE)
• 0 (FALSE)
Default
0
cfgNetTuning
This group enables users to configure the advanced network interface
parameters for the RAC NIC. When configured, the updated settings may take
up to a minute to become active.
NOTE: This group is applicable only for iDRAC on Rack and Tower
Servers and not for iDRAC Enterprise on Blade Servers.
CAUTION: Use extra precaution when modifying properties in this
group. Inappropriate modification of the properties in this group can
result in your RAC NIC become inoperable.
The following sections provide information about the objects in the
cfgNetTuning group.
cfgNetTuningNicAutoneg (Read or Write)
Descripti
on
Enables auto negotiation of physical link speed and duplex. If
enabled, auto negotiation takes priority over other values set in
this group.
Legal
Values
• 0 = Auto Negotiation is Disabled
• 1 = Auto Negotiation is Enabled
239