Reference Guide

Example

$ racadm getconfig -g cfgIPv6LanNetworking

cfgIPv6Enable=1

cfgIPv6AutoConfig=1

cfgIPv6Address=::

cfgIPv6PrefixLength=64

cfgIPv6Gateway=::

cfgIPv6DNSServersFromDHCP6=1

cfgIPv6DNSServer1=::

cfgIPv6DNSServer2=::

If both IPv4 and IPv6 are enabled on the CMC, IPv6 DNS servers take priority.

The order of preference for DNS servers is:

• cfgIPv6DNSServer1

• cfgIPv6DNSServer2

• cfgDNSServer1

• cfgDNSServer2

cfgIpv6StaticLanNetworking

This group is used to configure the IPv6 Static over LAN networking

capabilities.

cfgIPv6StaticEnable (Read or Write)

Descripti

Enables or disables the static IPv6 stack.

Legal

Values

• 0 — Disabled

• 1 — Enabled

Default

0 — Disabled

NOTE: If this object is modified, then the object cfgIPv6Enable is also

modified.

232