Reference Guide

You must have the Administrator privileges to modify the value
for this object.
Legal
Values
0 W: For platforms that do not support PCIe cards.
100 W — 500 W: For platforms that support PCIe cards.
Default
0: For platforms that do not support PCIe cards.
500 W: For platforms that support PCIe cards.
cfgServerPowerSupply
This group contains information related to the power supplies.
The cfgServerPowerSupply object group is applicable only for iDRAC on Rack
and Tower Servers and not for iDRAC Enterprise on Blade Servers.
NOTE: The getconfig subcommand always shows eight
cfgServerPowerSupply indexes, even if two power supplies are installed
in the system or the system supports a maximum of two PSUs. For the
uninstalled and unsupported units, all the objects in the
cfgServerPowerSupply group displays a value of 0.
The following sections provide information about the objects in the
cfgServerPowerSupply group.
cfgServerPowerSupplyIndex
Descripti
on
Specifies index of the PSU.
NOTE: Indexes 1–8 are supported to support up to 8 PSUs.
If any PSU is not present then
cfgServerPowerSupplyOnlineStatus does not exist and for
all the other properties, it is 0.
Legal
Values
Integer 1–8
Default
None
223