Reference Guide

cfgSerialBaudRate (Read or Write)
Descripti
on
Sets the baud rate on the serial port.
Legal
Values
9600, 28800, 57600, 115200
Default
57600
cfgSerialConsoleEnable (Read or Write)
Descripti
on
Enables or disables the serial console interface.
Legal
Values
• 1 (TRUE)
• 0 (FALSE)
Default
0
cfgSerialConsoleQuitKey (Read or Write)
Descripti
on
This key or key combination terminates Virtual Console text for
iDRAC when using the console com2 command.
Legal
value:
^ follows any alphabet (a-z, A-Z) ^ follows the listed special
characters: [ ] \ ^ _
NOTE: The CTRL key is represented by using the ^ (carat)
character.
NOTE: The CTRL key does not generate a character by
itself, but must be struck simultaneously with another key to
generate a character.
For example, striking both the CTRL key and the \ key
simultaneously (rather than sequentially) is denoted as ^\.
Configuration options: The value must start with the ^ character,
and must follow one of the characters — a-z, A-Z, [,], \
Default: <Ctrl> \
172