Reference Guide

current session (you must log out and log in again to make the
new settings effective.)
An expired Telnet session displays the following error message:
• For iDRAC on Rack and Tower Servers: Connection timed
out
• For iDRAC Enterprise on Blade Servers: Session timed
out. Closing the session.
After the message is displayed, the system returns you to the
shell that generated the Telnet session.
Legal
Values
• 0 (No timeout)
• 60–10800
NOTE: If 0 (no timeout is specified), the network
connection does not send alive packets to probe the
client. Otherwise, keep alive packets are sent to
guarantee that the client is responding.
Default
• For iDRAC on Rack and Tower Servers: 300
• For iDRAC Enterprise on Blade Servers: 1800
cfgSerial
This group contains configuration parameters for the services. One instance
of the group is allowed.
Use this object with the config or getconfig subcommands.
The following sections provide information about the objects in the cfgSerial
group.
NOTE: The cfgSerial object group is applicable for iDRAC Enterprise on
Blade Servers for only two properties — cfgSerialTelnetEnable=1
and cfgSerialSshEnable=1.
171