Reference Guide

cfgRhostsSyslogServer2 (Read or Write)
Descripti
on
To store the RAC and SEL logs Specify the second of three
possible remote syslog servers. This property is only valid if
cfgRhostsSyslogEnable is set to 1 (enabled).
Legal
Values
String from 0 to 63 characters.
Default
<blank>
cfgRhostsSyslogServer3 (Read or Write)
Descripti
on
To store the RAC and SEL logs specify the third of three possible
remote syslog servers. This property is only valid if
cfgRhostsSyslogEnable is set to 1(enabled).
Legal
Values
String from 0 to 63 characters.
Default
<blank>
cfgUserAdmin
This group provides configuration information about the users allowed to
access iDRAC through the available remote interfaces.
Up to 16 instances of the user group are allowed. Each instance represents
the configuration for an individual user.
Use this object with the config or getconfig subcommands. To use the
command as follows: -i <index group>, supply an index group number
The following sections provide information about the objects in the
cfgUserAdmin group.
160