Reference Guide

To apply this setting to iDRAC, use the —m option.
Use this object with the config or getconfig subcommands.
The following sections provide information about the objects in the
cfgRemoteHosts group.
cfgRhostsFwUpdateTftpEnable (Read or Write)
Descripti
on
Enables or disables firmware update from a network TFTP server.
Legal
Values
• 1 (TRUE)
• 0 (FALSE)
Default
1
cfgRhostsFwUpdateIpAddr (Read] or Write)
Description
Specifies the network TFTP server IPv4 or IPv6 address
that is used for TFTP firmware update operations.
Legal Values
A string representing a valid IPv4 or IPv6 address. For
example, 192.168.0.61
Default
For IPv4, it is 0.0.0.0
cfgRhostsFwUpdatePath (Read or Write)
Descripti
on
Specifies TFTP path where firmware image file exists on the TFTP
server. The TFTP path is relative to the TFTP root path on the
TFTP server.
NOTE: The server may still require you to specify the drive
(for example, C:).
Legal
Values
A string with a maximum length of 255 ASCII characters.
Default
<blank>
158