Reference Guide

Default
1 — Enabled
NOTE: If this object is modified, then the object cfgNicIPv4Enable is also
modified.
cfgNicStaticIpAddress (Read or Write)
Descripti
on
Returns or sets the current IPv4 address.
NOTE: Only set the current IPv4 address if cfgNicUseDhcp
is set to 0(false).
Legal
Values
Any Valid IPv4 address
Default
192.168.0.120
cfgNicStaticUseDhcp (Read or Write)
Descripti
on
Specifies whether DHCP is used to configure the IPv4 network.
Legal
Values
• 0 — IP Address, subnet mask and gateway are configured on
the device.
• 1 — IP Address, subnet mask and gateway are assigned from
the DHCP server.
Default
0 — Do not use DHCP
NOTE: If this object is modified, then the object cfgNicUseDhcp is also
modified.
cfgNicStaticNetmask (Read or Write)
Descripti
on
Returns or sets the static IPv4 Netmask.
NOTE: Only set the current IPv4 netmask, if
cfgNicUseDhcp is set to 0 (false).
Legal
Values
Any Valid IPv4 Netmask
Default
255.255.255.0
155