Reference Guide

set of remote management functions for blade servers
# idRacVersionInfo=P21
# idRacBuildInfo=200708301525
# idRacName=CMC-1
racadm getconfig -g idRacInfo
# idRacType=16
# idRacProductInfo=Integrated Dell Remote Access Controller
# idRacDescriptionInfo=This system component provides a
complete set of remote management functions for Dell
PowerEdge Servers
# idRacVersionInfo=1.06.06
# idRacBuildInfo=15
# idRacName=idrac-GSRS3V1
cfgStaticLanNetworking
This group contains parameters to configure the device NIC for IPv4.
NOTE: A few objects in this group may require the device NIC to be
reset, that may cause a brief loss in connectivity.
cfgNicStaticEnable (Read or Write)
Descripti
on
Enables or disables the NIC.
Legal
Values
• 0 — Disabled
• 1 — Enabled
Default
1 — Enabled
NOTE: If this object is modified, then the object cfgNicEnable is also
modified.
cfgNicStaticIPv4Enable (Read or Write)
Descripti
on
Enables or disables the IPv4 stack.
Legal
Values
• 0 — Disabled
• 1 — Enabled
154