Reference Guide

Example

racadm get nic.nicconfig.2

[Key=NIC.Integrated.1-2-1#nicconfig]

BannerMessageTimeout=5

BootStrapType=AutoDetect

HideSetupPrompt=Disabled

LegacyBootProto=NONE

LnkSpeed=AutoNeg

#VLanId=1

VLanMode=Disabled

• To display a single object for the specified group, run:

racadm get device.<group name>.<index>.<object name>

Example

racadm get nic.nicconfig.3.legacybootproto

[Key=NIC.Integrated.1-3#NICConfig]

Legacybootproto=PXE

RACADM Command Options

The following table lists the options for the RACADM command:

Option Description

-r <racIpAddr>

-r <racIpAddr> : <port

number>

Specifies the controller’s remote IP

address.

Use <port number> if the iDRAC port

number is not the default port (443).

-u <username>

Specifies the user name that is used to

authenticate the command transaction.

If the-u option is used, the -p option

must be used, and the -i option

(interactive) is not allowed.

-p <password>

Specifies the password used to

authenticate the command transaction.

If the -p option is used, the -i option is

not allowed.

-S

Specifies that RACADM must check for

invalid certificate errors. RACADM stops

the execution of the command with an