Reference Guide

• Status — indicates to view the progress or status report of
the initialize operation.
Output
If initialization is in progress, the message Initialization of
the vFlash SD Card is now in progress is displayed. If
unsuccessful, appropriate error message is displayed.
If the status of the last operation performed is successful, the
message LastAction Progress
Status===========================================
===============Initialize SD Card 100 % Complete
is displayed. If unsuccessful, appropriate error message is
displayed.
vflashpartition
Descripti
on
Manages the partitions on the vFlash SD card.
NOTE:
• To run this subcommand, you must have the iDRAC
Enterprise license.
• After iDRAC restart, the status of the previous operation
performed on the partition(s) is erased.
Synopsis
racadm vflashpartition <create | delete | status
| list> -i<index> -o<label> -e<emulation type> -
s<size> -f<format type> -t<partition type> -
l<path> -u<user> -p<password> -a
Input
• -o — Label that is displayed when the partition is mounted
on the operating system. This option must be a string of upto
six alphanumeric characters. VFLASH is the only accepted
volume label for non-Dell SD card.
• -e — Emulation type must be either floppy, CD, DVD, or
HDD.
• -s — Partition size in MB.
• -f — Format type for the partition based on the type of the
file system. Valid options are
raw, ext2, ext3, fat16, and
fat32.
• -t — Create a partition of the following type:
– empty — Creates an empty partition
– image — Creates a partition using an image relative to
iDRAC.
146